It appears you have not registered with our community. To register, please click here ...
Proudly Sponsored By
| Advertise With Us
Home arrow Forum arrow Support Forums arrow General arrow 3 wheel motion kit for air ride

Pages: [1]
EDDIE12V
auto sound tech
Registered Member

Offline Offline

Posts: 17


3 wheel motion kit for air ride
« on: 11/27/08, 06:46 PM »

hey has any one had any experience with these kits do they work or is it a lame add on, 3 Wheelingn is pretty cool but lifting one wheel off the ground with no body movment? I dont know
swswsw03
Registered Member

Offline Offline

Posts: 2


Re: 3 wheel motion kit for air ride
« Reply #1 on: 11/29/08, 09:52 AM »

Hey Eddie I read through the site cause I'd be interested in something that too.  From what I can tell, they took the same basic concept from hydrolics with 3 wheel and added a strut in the rear for basic 3 wheel from the front.  The concept would work but your only going to get 3 wheel from the front.  Now IMO if you don't already have bags then yes, i'd give it a shot.  If you do already have bags then I wouldn't do it.  The bags you have now would basicly go to the trash and you would have to pay the $5600 for a clean install.  I got a 02 explorer, bagged.  It's in the shop now getting a tune up on the bags and their doing some other things; paint, lambo, gullwing, molding, wheels and a few other things so I had them go ahead and redo the bags, otherwise I'd do it myself.  If I didn't already have them redo my existing setup then I would have tried these out.
EDDIE12V
auto sound tech
Registered Member

Offline Offline

Posts: 17


Re: 3 wheel motion kit for air ride
« Reply #2 on: 11/30/08, 08:53 AM »

dose any one Know a manufacturer for these or is it a custom set up and if so where can I find a plumbing diagram???
EDDIE12V
auto sound tech
Registered Member

Offline Offline

Posts: 17


Re: 3 wheel motion kit for air ride
« Reply #3 on: 12/12/08, 06:41 AM »

I found somthing from 3wheeltuck.com but there website dose not seem to work Sad
Pages: [1]
    « 0 Members and 1 Guest are viewing this topic. »
    Jump to:  

    Page created in 0.024 seconds with 21 queries.
    Google last visited this page on 07/30/10, 09:41 PM